Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Air Duct Cleaning in Jacksonville: What to Know First
Rotobrush air duct cleaning in Jacksonville typically runs $285 to $540 for a full system, and we schedule most jobs within three to five business days. We’re an independent Rotobrush service provider, which means we work on the equipment, not for the manufacturer, and we quote one flat price per system before the van rolls. This page is for Jacksonville homeowners who own a Rotobrush system or are weighing one and want straight answers about how the equipment holds up, what it costs to clean it properly, and who’s actually coming to the door. Call (904) 329-7854 for a free estimate.
How Rotobrush Products Fail – and How We Fix Them
Rotobrush built its name on a simple idea: one machine that agitates and vacuums at the same time, so a technician can move through the ductwork in a single pass. In our experience across Jacksonville, the equipment does that job well, but the failure modes are predictable. Here’s what we actually see:
- Rotobrush aiR+ and the brush-shaft bearing wear. The aiR+ line runs a flexible shaft that spins a soft agitator brush inside the duct. After enough Jacksonville jobs, that shaft bearing starts to whine, then wobble, and then the brush stops spinning true. The symptom a homeowner notices is usually not the machine at all: it’s uneven cleaning, where the supply side comes out spotless and the return side stays coated because the brush skipped. We replace the bearing assembly and re-tension the shaft, and that’s typically a same-visit fix.
- The R500 and R200 series HEPA filter loading. These compact units pull debris through a filter that saturates faster in humid air. Jacksonville’s summer humidity makes dust stick together and pack the filter pleats, which drops suction. An owner might not see it, but the machine starts leaving fine debris behind, especially in the return drop. We check and replace the HEPA filter as part of any cleaning where the system has been in service more than a year locally.
- Vacuum hose collapse on older Rotobrush units. The ribbed vacuum hose on some earlier Rotobrush machines kinks where the tech makes the tight turn into the plenum. When the hose collapses, the machine runs loud but pulls little. We carry aftermarket hose stock that’s thicker-walled than the original, and if a homeowner’s unit has this failure, we’ll note it and recommend the upgrade rather than patching it again.
- Rotobrush BrushBeast and abrasive brush wear. The BrushBeast uses a stiffer bristle pattern intended for heavier buildup. Put it on old fiberglass-lined ducts in a Jacksonville home and it can shed bristles into the air stream. We’ve found stray brush bristles in register boots more than once. Our techs inspect the brush head before every job and swap worn heads before they shed.
- Cam-lock and quick-connect fitting wear. Rotobrush tool heads attach with cam-lock fittings that go through thousands of connect-disconnect cycles. Once the lock grooves round off, the head can pop free mid-run, which is loud and leaves a section of duct surface untouched. We carry replacement cam-lock fittings in the truck and test every connection before we start pulling air.
Styles & brands we work with
Our Rotobrush Air Duct Cleaning Process
Here’s what happens when you call us for Rotobrush air duct cleaning in Jacksonville, from the first ring to the final walkthrough:
- 1
You call, a person answers. No phone tree. We ask about your system, whether you’ve had any dust or allergy symptoms, and how many returns your home has. That gives us a working picture before we arrive.
- 2
We send your tech’s name and photo. Before the visit, you see exactly who’s coming. At the door, the tech shows a photo ID badge. The Threshold Standard means every tech is background-checked and identity-verified.
- 3
We inspect before we quote. The tech opens the plenum, checks the filter, and looks at your return and supply sides. If your Rotobrush unit has a mechanical issue like a worn bearing or loaded HEPA filter, we tell you then. If the ducts are fine and don’t need much, we tell you that too. Tell me what you’re seeing and I’ll tell you if it’s worth fixing.
- 4
We put the price in writing. One flat price for the whole system, agreed before work starts. Not per vent. No surprise line items at the end.
- 5
We clean with negative-pressure extraction. That’s the trade term for pulling air backward through the system while agitating the duct walls, so debris moves toward the vacuum instead of drifting into your living room. Because we’re working from a Rotobrush platform, we can use the right brush head for your duct type and adjust the agitation speed per section.
- 6
We show you the work. Before-and-after photos of your own ducts, not a stock photo from a brochure. Then we walk you through anything we found. If we performed a repair, it’s covered by a written guarantee with a free second visit if the repair fails within 365 days.
See the difference
Before
After
Before
After
Before
AfterWhat Rotobrush Air Duct Cleaning Costs in Jacksonville
For a standard single-family home in Jacksonville, a full Rotobrush air duct cleaning runs between $285 and $540. Here’s the breakdown by job type:
- Full system cleaning (1,500-2,500 sq ft home, supply and return): $325-$540
- Supply-side only: $210-$360
- Return-side only: $175-$300
- HEPA filter replacement (if your Rotobrush unit’s filter is loaded): $40-$90, depending on the model
- Brush-shaft bearing replacement on aiR+ units: $120-$190, including the part
What moves the price: how many returns your home has, how accessible the plenum is, and whether the system has a mechanical issue that needs attention before cleaning. Properties that have gone years between cleanings or have pets in the house take longer. The price we quote is the price you pay. Call (904) 329-7854 and we’ll give you a real number for your system before you commit to anything.
Why Jacksonville Homeowners Call Linden Air Duct Jacksonville for Rotobrush Work
We’ve been doing this work since 2004 as part of the Threshold Group family, and Marcus Veale has spent two decades on the mechanical side of HVAC, including sheet metal and air conditioning training at Los Angeles Trade-Technical College. Marcus built a reputation on not overselling: if the ducts are fine, he says so. What that means for you is simple. Your tech shows up with a name and a face you saw before the visit. The price is in writing before work starts. If a repair doesn’t hold, we return free within 365 days. And because we service Rotobrush alongside Lennox, Trane, and Carrier equipment, we know when a duct issue is actually a duct issue and not something else in your system. Jacksonville homeowners in Mandarin, Riverside, Ortega, and San Marco call us because they want a straight answer. That’s what we give them.
FAQs
No. Rotobrush warranties cover the equipment itself, not the cleaning service performed by an independent provider. As an independent Rotobrush service provider, we don’t file warranty claims on your behalf, but we do perform cleaning in a way that won’t void your coverage: no harsh chemicals, no abrasive pads on lined ducts, and correct brush head selection for your duct type. If your machine needs a repair that’s outside the cleaning itself, we’ll tell you before we touch anything. Call (904) 329-7854 for a straight read on your situation.
A full system cleaning typically takes three to five hours for a single-family home, depending on the number of returns and how much buildup is in the lines. Jacksonville’s humidity means dust tends to adhere to duct walls more than in dry climates, so we don’t rush the agitation pass. If your Rotobrush unit also needs a filter replacement or bearing service, budget an extra hour. We’ll tell you the time window when you call for an estimate.
If the brush shaft spins true and the motor runs smooth, a bearing replacement is almost always the right call. Bearings run $120 to $190 installed, while a replacement aiR+ unit runs well over $1,000. The exception is when the housing around the bearing has cracked from repeated vibration, at which point we’ll show you the crack and let you make the call. We’d rather fix the bearing and have you spend the difference on an actual duct cleaning.
You’ll get before-and-after photos of your own ducts on the day of the job, not a stock image. We also open the plenum access for you to inspect before we seal it back up. If a section of your ductwork has restricted access, like a tight return drop in an older Jacksonville home, we’ll use a video inspection scope and show you that footage too. The work is documented in writing on your invoice, including exactly which sections were cleaned and what we found in them.
It’s a vacuum system, so there’s always some noise, but a properly set up Rotobrush rig with negative-pressure extraction contains debris rather than blowing it around. We lay drop cloths at every register, seal off the plenum access, and run the vacuum through a HEPA filter so fine particulate doesn’t re-enter the living space. Jacksonville homes with pets, especially dogs that shed heavily, will see the most debris in the return side, and that’s where a lot of the work focuses. We’ll walk you through what we found before we leave.
If you own a Rotobrush system and your ducts haven’t been cleaned in years, or you’re noticing dust levels that don’t match how often you change the filter, call (904) 329-7854. We’ll give you a written price before any work begins, and you’ll know exactly who’s coming to your door before they ring the bell.
Written by Marcus Veale, Owner, Linden Air Duct Jacksonville at Linden Air Duct Jacksonville, serving Jacksonville and nearby areas.