Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Coil Cleaning: The Jacksonville Owner’s Guide
If you have an Abatement Technologies air cleaner or UV purification system with a dirty or fouled coil, we stock the cleaning components and service the full unit here in Jacksonville. A typical Abatement Technologies coil cleaning and service call runs between $165 and $385 depending on your model and how much buildup we’re dealing with, and in most cases we can get a technician out the same week you call. Most Jacksonville homeowners discover the problem the same frustrating way: the system has been running fine for years, then the airflow drops, or a musty smell starts coming through the vents, or the unit starts cycling more than it should. The coil is the part doing the actual heat exchange or condensation work, and when it gets coated with Florida’s unique mix of dust, humidity, and biological growth, the whole system works harder for worse air.
Key Takeaways:
- We service Abatement Technologies units throughout Jacksonville, including Mandarin, Riverside, San Marco, and the Beaches
- Installed coil cleaning typically runs $165-$385, quoted in writing before we start
- Our techs carry common Abatement Technologies coil cleaner and replacement coils on the truck
- Every job is backed by our 365-Day Done Right Promise in writing
Which Abatement Technologies Models This Applies To
Abatement Technologies builds several lines of air purification and coil cleaning equipment, and the compatibility question matters more than most Jacksonville homeowners expect. The main units we see in local homes include the CAP series (Coil and Air Purifier), the CAP-H line for higher-capacity systems, and the SWAT series used in larger whole-home setups. The coil cleaning components are not universal across those lines, and that’s where we see owners get tripped up. The CAP series uses a specific coil configuration with an access panel on the front of the unit, while the SWAT series coils sit in a different housing and require a different cleaning approach and, if you’re replacing rather than cleaning, a different coil assembly entirely.
Here’s the compatibility gotcha we run into constantly in Jacksonville: the model number on the outside of the cabinet does not always tell you which coil is inside. Abatement Technologies shipped some units with dealer-installed coil options, so we always verify with the serial number and, when possible, a photo of the coil itself before we quote a replacement. If you’re trying to identify yours, look for a label that starts with “CAP” or “SWAT” and note the voltage rating, which is usually 115V or 230V. We stock OEM Abatement Technologies coils for the most common CAP series units and quality aftermarket equivalents for older models where the OEM part is no longer manufactured. The aftermarket coils we use are matched to the exact dimensions and fin density of the original, and we tell you upfront which one you’re getting and why.
Styles & brands we work with
Signs Your Abatement Technologies Coil Cleaning Is Failing
- Airflow has dropped noticeably. A coil caked with dust and biological growth restricts air moving across it, so your system has to pull harder to move the same amount of air. In Jacksonville’s humidity, that coating builds faster than in drier climates, which is why we recommend checking coil condition annually here even if the manufacturer’s guidelines are less frequent.
- You smell something musty or sour when the system runs. That’s the smell of moisture and organic material sitting on a coil that isn’t being cleaned. Florida’s wet air means a coil that stays damp becomes a breeding ground, and cleaning it properly is the only fix that lasts.
- The unit is running longer cycles or short cycling. A dirty coil forces the system to work longer to hit the same temperature, and in some cases it overheats and shuts off early. Both patterns are signs the coil needs attention, and both show up on your electric bill.
- You see visible buildup through the access panel or around the drain line. If the coil is visibly dirty, it’s already past time to clean it. The buildup you can see is a fraction of what’s embedded between the fins.
- The drain pan or line is clogging more often. As coil buildup washes into the condensation system, it clogs the drain. If you’re clearing a clogged drain line more than once a season in Jacksonville, the coil is usually the source.
Replacement Cost & What’s Included
A full Abatement Technologies coil cleaning and service call in Jacksonville typically runs between $165 and $385 installed. The lower end covers a coil cleaning with the proper coil cleaner, a check of the drain system, and verification that the unit is pulling the right amperage. The higher end is for units where the coil is too far gone to clean effectively and we’re installing a replacement coil assembly, which adds parts cost to the labor. If your unit needs a replacement coil, we give you the price for the coil and the labor separately in writing before any work starts.
| Service | Typical Jacksonville Price |
|---|---|
| Coil cleaning (chemical clean, drain check, amp draw verification) | $165 – $245 |
| Replacement coil assembly (CAP series, OEM) | $280 – $385 installed |
| Replacement coil assembly (aftermarket equivalent, older models) | $215 – $295 installed |
Every coil cleaning or replacement we do includes our 365-Day Done Right Promise: if the work isn’t right, we come back and make it right, and that’s in writing on every job. We don’t do per-part add-on pricing or surprise line items at the end. The price we quote is the price you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
This is the part where we’re honest with you. Coil cleaning on an Abatement Technologies unit is not high-tension work and it’s not an electrical hazard in the way a garage door spring or a live panel is. But it does involve accessing components inside a unit that’s wired into your HVAC system, and working with chemical coil cleaners that need proper rinsing and drainage. If you don’t have the right cleaner, you’ll strip the protective coating on aluminum fins and shorten the coil’s life. If you don’t rinse properly, you’ll leave residue that attracts more buildup than you started with. And if you damage a fin pack while brushing it, you’re buying a new coil anyway.
What you can safely do is check the filter, look at the exterior of the unit for visible buildup, and make sure the drain line isn’t backed up. But for the coil itself, this is a case where calling us first saves money in the long run. Call (904) 329-7854 and tell us the model number off your unit. Marcus Veale will tell you straight whether it’s worth a service call or whether you’re fine for another season.
Frequently Asked Questions
In Jacksonville’s humidity, a properly maintained Abatement Technologies coil typically lasts 8 to 12 years, but we’ve replaced coils in Mandarin and Riverside homes at the 6-year mark because the units were never cleaned and Florida’s moisture did its work. The coil itself is the failure point long before the rest of the unit, which is why we check coil condition as a standard part of every air duct cleaning and system service we do. Call us at (904) 329-7854 if your unit is more than 5 years old and has never had the coil cleaned.
Most of the time, yes, a dirty coil can be cleaned rather than replaced, especially if the unit is under 5 years old and the buildup hasn’t hardened or corroded the fins. We make that call honestly: if the coil will clean up and perform well, we clean it and tell you so, and we don’t sell you a replacement you don’t need. If the fins are corroded or the buildup is too embedded to remove without damaging the coil, we tell you that too, with photos so you can see exactly what we’re seeing. Call (904) 329-7854 for a straight answer.
A standard Abatement Technologies coil cleaning takes about 45 to 90 minutes on site, and a coil replacement typically takes 1 to 2 hours depending on the model and access. We don’t rush it because the rinse and drainage step matters, especially in a humid climate like Jacksonville’s where incomplete drying is a fast path back to the same problem. Your tech will give you a realistic time window before the visit so you can plan around it.
We keep the most common Abatement Technologies coil cleaners and replacement coil assemblies for the CAP series on the truck, and we stock parts for other air quality brands we service including Lennox, Trane, and Carrier. If your specific coil isn’t on hand, we can usually have it within a few business days. When you call (904) 329-7854 with your model number, we’ll tell you before the visit whether we have what you need on the truck or need to order it.
Call Us for a Straight Answer on Your Abatement Technologies Unit
If your Abatement Technologies system isn’t doing what it used to, call us at (904) 329-7854. We’ll get the model number from you, tell you what we think is going on, and give you a written price before any work starts. No bait pricing, no surprise invoices, no technician at your door you haven’t been introduced to by name and photo first. That’s how we’ve done it in Jacksonville since 2004, and it’s why homeowners in Mandarin, Riverside, and across the city call us back. As Marcus Veale says, “Tell me what you’re seeing and I’ll tell you if it’s worth fixing.”
Written by Marcus Veale, Owner, Linden Air Duct Jacksonville at Linden Air Duct Jacksonville, serving Jacksonville and nearby areas.